Our latest design: Easy LED Box light.
This is a Wall mount low cost utility light box like picture shown at below.
Tradditional Wall mount box light use fluorescent tubes in utility light box.
This one is about 4' long and use 70 Watt of Power.
Our Prototype LED box light is 28" long, prototype made with one piece of corrugated paper and diffuser film. The light is consist of two Easy LED module with mounting hardware. Liht output is 32Watt, mostly point toward at below where needed. The structure is extremely simple
There are two piece of Easy LED modules mounted on a bracket, with driver at middle.
module is bent to point light output at 45 degree below; and made small wedges at top for easy insertion of lamp cover box
The box is extremely simple as well, diffuser film at front opening and another opening
at back for hang at top of module assembly
All you need to do is to install the light module assembly to Wall electricity box, connect the wires.
Then put light box cover on to the light module assembly, it just hang by gravity and its edge will
snag fit in between wall and the module plates. Then the light is ready for use
Any comment? We want to hear from you. You can comment in blog or write us at easyledlighting@gmail.com
No comments:
Post a Comment